Fluke 789 ProcessMeter Offers

The Fluke 789 ProcessMeter is a full-featured, digital multimeter that features a built-in loop calibrator and the ability to connect using Fluke Connect optional IR3000FC module, and it is a safety-rated digital multimeter device. It's also easy to use with its built-in peripherals.

The 789 is equipped with a built-in 24-volt loop supply, which simplifies the need to carry a separate supply when testing offline. It also has a built-in wireless data logging system.

The 789 is a DMM device that has all the features needed to perform standard DMM functions. It features a frequency measurement capability to 20 kHz, as well as a variety of test and continuity modes.

The 789 is a portable device that features a built-in 4-20 mA source, which provides power to the loop and 250-ohm resistance. It also includes a SpanCheck function that lets users measure resistance and voltage.

FEATURES:

• 20 mA dc current source/measure/simulate
• Simultaneous mA and % of scale readout
• DMM designed to meet 1000 volt IEC 61010 CAT III and 600 V CAT IV standards
• Fluke Connect® compatibility for wireless data logging (with IR3000FC module)
• Precision 1000 V, 440 mA True RMS digital multimeter
• Frequency measurement to 20 kHz
• Min/max/average/hold/relative modes
• Diode test and continuity beeper
• Manual step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
• Externally accessible battery for easy battery changes
• 24 V Loop power supply
• HART mode setting with loop power (adds 250-ohm resistor)
• Provides 1200 ohm drive capability on mA source
• Delivers 0.1% dc voltage accuracy and 0.05% dc current accuracy
• Includes 0% and 100% buttons to toggle between 4 and 20 mA sourcing for a quick span check
• Large dual display with enhanced two-level backlight brightness settings